HYDRA M AUTO
with 2 manometers
automatic self-cleaning filters with back-wash

HYDRA-M AUTO self-cleaning filters is provided with 2 manometers which ensure the proper timing for the cleaning operation: when the pressure at outlet manometer drops 1 BAR below the pressure at inlet manometer it is time to operate the cleaning operation. HYDRA-M AUTO have been designed with innovative solutions regarding the efficiency of the system for the self-cleaning of the cartridge, thanks to newly designed back-wash on counter-current which grants the highest particles removal from the cartridge. When the cartridge is to be cleaned, the cleaning operation with back-wash is simply operated by the programmer located at the filter bottom. The automatic self-claning process is driven by a programmer with dual programming mode:
- set how may hours in between self-cleaning processes,
- set how many seconds the self-cleaning process will last.
Thanks to the dual programming mode HYDRA AUTO performs customized self-cleaning programs, depending on water quality. In addition, if the cartridge should not be perfectly cleaned by the programmed process, by simply pressing the dedicated MANUAL FLUSH key it is possible to immediately start up a new self-clening process (the operation can be reapeated any time). That operation causes a pressure-drop which pushes the cartridge downward the housing bottom and reverses the water flow from the outer to the inner side of the cartridge. It is that counter-current back flow which washes away to the discharge the impurities trapped onto the outer side of the cartridge. The filters perform 90 micron filter rate with stainless steel net cartridge or plastic net cartridge and 50 micron filter rate with pleated plastic net cartridge. The HYDRA-M AUTO filter features a drain funnel, which is a device designed to protect potable water in water installations against pollution by backflow in accordance with European standard UNI EN 1717 November 2002. This device prevents backflow by making all elements downstream from the solenoid drain valve vent to atmosphere (protection unit symbol: DC).

1 View PDF Catalogue (size)

1Download Catalogue (size)